1
5
6
7
8
2
4
3
04
03
1
Speedometer: Display the current speed of the scooter, as well as to display error codes.
2
Bluetooth: When this icon lights up, it indicates that the scooter has been successfully connected to the mobile device.
5
4
Modes: is for pedestrian mode; the maximum speed of the scooter is 6 km/h, and the taillight is blinking in this mode. D is for
standard mode, and S for sport mode.
Control Panel & Power Buon: Press the buon to turn the scooter on, and hold the buon for 3 seconds to turn the scooter off. When
the scooter is on, press the buon to turn on/off the headlight and taillight, and press twice to cycle through the modes.
3
Temperature Warning:
• When the scooter is not being charged, if the ambient temperature is lower than -10°C or higher than 45°C, the temperature error icon
on the control panel will blink. Riding in such circumstances may result in reduced performance of the scooter and other risks. You
can use the scooter aer the temperature returns to the normal operating range.
• When the scooter is being charged, if the ambient temperature becomes lower than 0°C or higher than 40°C, the temperature error
icon on the control panel will blink and the scooter may become unable to be charged. Continuing charging the scooter may even
pose a risk. When the ambient temperature returns to the range of 0°C to 40°C, the temperature error icon will go out and you can
charge the scooter again.
Contro
l Panel & Power Button
6
7
8
Baery Level: The baery power is indicated by 5 bars, each representing approximately 20% of a full baery.
Locking Reminder: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi
Home/Xiaomi Home app.
Error Notification: When the wrench icon displays red, it indicates that the scooter needs repair. When the wrench icon blinks red, it
indicates that the scooter has an error.
To Next Page
Loading...
Need help?
General