Xiaomi 4 Go - Package Contents; Assembly and Set-up; Initial Placement and Kickstand; Stem Installation

6
5
Package Contents
User Manual
Specifications and Certifications
Important Information
Baery Charger
1
Hold the stem and the middle of the deck to place the
scooter on the ground. Then put down the kickstand.
2
Lift the stem up, and open the quick-release clamp.
Align the stem with the groove and install it onto the
front fork assembly.
Assembly and Set-up
4
Shake the stem before riding to make sure the quick-
release clamp is secured.
3
Secure the quick-release clamp firmly after the spring
button pops out.