8
Display Screen
The number on the display screen represents the current battery level in a
percentage during charging. When the number turns into 100, the battery is
fully charged.
When the vacuum cleaner is being charged, you can press the power button to
wake up the display and check the current charging percentage.
Charging
Notes:
Fully charge the vacuum cleaner before using it for the first time. This will take
about 4 hours.
The vacuum cleaner cannot be used while charging.
Vacuuming at the highest suction level for a prolonged period will cause the
battery to heat up, which may increase the charging time. Before charging the
vacuum cleaner, it is better to cool it down for 30 minutes.
Battery Status Indicator
Once the vacuum cleaner is fully charged, the indicator will turn off after 5 minutes, and the
vacuum cleaner will then enter the energy-saving mode.
Note: means off, means on, and means blinking.
Low battery
Fully charged
Half battery
Nearly full
Charging the vacuum cleaner with the charger
Battery Status Indicator
Charging the vacuum cleaner on the charging mount
1
2
Charging Contact
To Next Page
Loading...
Need help?
General
