Xiaomi Mi 1C User Manual

Installation
1. Install the stand onto the back of the monitor, then fix firmly with the stand
screws.
2. Connect the stand to the base, then tighten the base screw securely.
3. Adjust the angles forward or backward based on your needs.
Note: When adjusting the angles, it is recommended to use one hand to hold down
the base and use the other hand to adjust the monitor. Otherwise, the monitor may
fall down.
Forward 5°
Backward 15°
2
Stand Screw
Base Screw

Xiaomi Mi 1C Specifications

General

Type	Robot Vacuum Cleaner
Suction Power	2500 Pa
Battery Capacity	2400 mAh
Dustbin Capacity	600 ml
Water Tank Capacity	200 ml
Operating Time	Up to 90 minutes
Weight	3.6 kg
Connectivity	Wi-Fi
Compatible App	Mi Home
Navigation	Visual Navigation
Control	App, Voice Control