Illustrations of product, accessories, and user interface in the user manual are for reference purposes
only. Actual product and functions may vary due to product enhancements.
Instructions
Charging
Charging the earphones
When the earphones are placed in the charging case, they will automatically start charging.
Charging the charging case
Use a Type-C charger to charge the charging case, or place the charging box light up on a
compatible wireless charger. The red indicator light flashes during charging, and the white
indicator light turns off aer charging for 10 seconds.
Note: Prior to first use, the earphones are deactivated. To activate them, place them into the charging
case, and press the function button for 5 seconds. We recommend fully charging the earphones before
using them for the first time.
Checking Battery Level
Checking the battery level of the earphones
After connecting the earphones to a phone, you can check the
earphones’ battery level on the phone’s status bar.
Note: The phone’s status bar always displays the battery level of the earphone with the lowest
baery level. This feature is not supported by some phones.
Checking the baery level of the charging case
Open the charging case’s lid, or press the function buon if the lid is closed:
① When the indicator light of the charging case stays lit for 5 seconds, it means the battery is
sufficient.
② When the charging case’s indicator light is blinking, it means the battery level is low and should
be charged immediately
Checking the baery level by a Mi phone
After successfully connecting to a phone, place the earphones into the charging case and close its
lid. Make sure the Bluetooth function is enabled on your Mi phone. Hold your phone close to the
charging case, then open the case’s lid. A notification will appear on the phone, then you can
To Next Page
Loading...
Need help?
General
