5
• Pull out the filter assembly from the bottom of the dirt
container.
• Rotate the outer mesh filter counterclockwise, then pull
out the filter.
• The dirt container, mesh filter, filter, and nozzles
can
all be rinsed with water. Ensure each component is
completely dry before reinstalling.
•
•
•
•
•
Note:
The vacuum cleaner is non-washable, but the exterior can
be cleaned using a soft, damp cloth. Make sure that water
does not get into the charging port. It is recommended to
replace the filter once every 3 months.
Care & Maintenance
• Gently slide down and
press the release button
to pop open the dirt
container, then empty out
the contents.
• Rotate the dirt container
counterclockwise, as
illustrated, to unscrew it,
then gently remove the
dirt container.
Filter Assembly
Mesh Filter
Filter
Rotate the Mesh Filter Clockwise
To Next Page
Loading...
