Xiaomi Mi Robot Builder Rover - App Installation and Usage; Download and Connect; Firmware Updates

This version is for private use only and should not be distributed.
04
Installing the app
1. Download the app
Scan the QR code below or go to App store to download and install "Mi Robot Builder".
2. Connecting your robot
Make sure your phone's Bluetooth is turned on. Open the Mi Robot Builder app and tap
the Bluetooth icon in the upper le corner to connectyour robot.
Bluetooth
Connected
Baery 65%
Help Seings
3. Firmware updates and support
Make sure your phone is connected to the internet (preferably via Wi-Fi).
Open the app and connectyour robot, and then go to Seings > System updates >
Firmware updates.
It takes about 20 minutes to update the firmware.
Please note following:
• Make sure the motor is off during the updates. Otherwise, the parameters may be reset
and which may result in malfunction.
• Make sure the controller is fully charged before the update.
• Keep your phone away from the controller during the update.
• Refer to the "Help" in the app to learn more.