Battery Installation
Xiaomi Smart Scales
Installing «Mi Fit» APP on your mobile Pairing scales with mobile Meaning of symbols (characters)
On image, which is below, shown how to open unit cover for the
battery. Then place 4 batteries in the unit. Pull down the button
cover
Setting unit for weight measurement
You can adjust and set required unit for weight measurement by
moving to the right, left, Mi scales can measure weight in kg, jīn
and pounds.
kg jīn pnd
Getting Started
After installing batteries, close the cover and set scales in a
stable, level ground. Wait until on scale appears «HELLO», and
then you can stand on it. Once on the scales numbers will ash,
it means that your weight is dened.
To ensure accurate measurements, do not set scales on
carpets, rugs, or other soft surfaces.
To download and install the application «Mi Fit» for scales on
mobile, in Mi Store or Apple Store nd «Mi Fit» or scan QR-
code.
Attention! You need to login to your Mi-account.
Register there:
http://i.mi.com
Switch on scales application «Mi Fit», basing on the
registration number of Mi scales connect it to mobile. After
pairing, you can save results in the «cloud» check your weight
on your phone and history of weighing.
If during weighing battery icon appears with a small charge,
which you see on a picture below, please change them
immediately.
If scales will ash OL (see picture below), this means the
excess of the maximum weight 150 kg.
pull down
To Next Page
Need help?
General
