be careful
● Remember that these setings are for reference only. Due to the different sources, sizes,
shapes and brands of food materials,We cannot guarantee the ideal setting for your
ingredients.Youding's rapid air change technology will immediately reheat the air in the
product, so it is faster when frying with air Pull the frying pan out of the product quickly
without affecting the cooking process.
Tips
● The cooking time for smaller ingredients is slightly shorter than that for larger ones.
● When the amount of ingredlents is large, the cooking time only needs to be slightly
increased, while when the number of ingredients is less, the cooking time should be
slightly shortened Adjust the time.
● In the process of cooking. tuning over small size food materials can improve the final
cooking effect and help to make All materlals are fried evenly.
● Add a little oll to the fresh potatoes to make them crispy.Affer adding oll, the ingredients
should be left for a few minutes, and then Then fry it in an electric oven,
● Do not cook food with high oil content in the electric oven.
● Snacks that can be cooked in an oven can also be cooked in an electric oven.
Cleaning and maintenance:
● Before cleaning the electric oven, please cut off the power supply and pull out the
plug, and wait for the electric oven to cool down completely conduct,
· If there are oil stains in the electric oven, please wipe it with a soft wet cloth which is
covered with neutral detergent.
· Clean all accessories including frying pan and gril with neutral detergent.
● Do not wash the whole oven in water or other liquids to avoid electric shock hazard or
Function failure,
● After cleaning, store the product in a cool and dry place after drying.
matters needing attention:
① Be aler to the risks that may lead to personal danger, serous injury and malor
properly loss,
Attention should be paid to the risk of personal injury or material damage.
warning
● During the working perlod, the surface temperature of the front, left and
rlght sides and upper part of the product is measured Area/surface with
'pit temperature surface"symbol lt wll become hot in the process of
making. Pay atfention to avoid scalding.
To Next Page
Loading...
