07
Environmental Protection
Boom Cover
Removing the baery:
When the shaver reaches the end of its service life, please
remove, dispose of, or recycle the built-in baery in accordance
with local laws and regulations of the country or region where
the shaver is used. If the baery cannot be removed, dispose of
it in strict accordance with local regulations on household
waste management in your area.
This shaver contains a non-replaceable baery.
Do not expose the baery to fire to prevent it from exploding
or releasing toxic and hazardous substances.
Do not short-circuit the baery to prevent it from combusting
and causing fire.
The baery must be removed from the appliance before it is
scrapped.
The appliance must be disconnected from the supply mains
when removing the baery.
The baery is to be disposed of safely.
Note: Disconnect the shaver from power and make sure the
baery is depleted before removing the baery.
1. Use a small flathead screwdriver to pry open the boom
cover and remove the on/off buon of the shaver. These
parts cannot be restored once they are disassembled.
Pry Open
Do not disassemble the shaver unless you want to dispose of
it; otherwise, the shaver will be damaged.
Make sure to operate in a safe manner and unplug the shaver
before removing the baery.
WARNINGS: