Xilinx MicroBlaze Spartan-3E 1600E Edition - Key Components and Features

10 MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
www.xilinx.com UG257 (v1.1) December 5, 2007
Chapter 1: Introduction and Overview
R
• http://www.xilinx.com/xlnx/xebiz/designResources/ip_product_details.jsp?key=DO-
ML403-EDK-ISE
Also consider the capable boards offered by Xilinx partners:
• h
ttp://www.xilinx.com/products/devboards/index.htm
Key Components and Features
The key features of the MicroBlaze Development Kit board are:
• Xilinx XC3S1600E Spartan-3E FPGA
♦ Up to 250
♦ user-I/O pins
♦ 320-pin FBGA package
♦ Over 33,000 logic cells
• Two Xilinx 4 Mbit Platform Flash configuration PROM
• Xilinx 64-macrocell XC2C64A CoolRunner CPLD
• 64 MByte (512 Mbit) of DDR SDRAM, x16 data interface, 100+ MHz
• 16 MByte (128 Mbit) of parallel NOR Flash (Intel StrataFlash)
♦ FPGA configuration storage
♦ MicroBlaze code storage/shadowing
• 16 Mbits of SPI serial Flash (STMicro)
♦ FPGA configuration storage
♦ MicroBlaze code shadowing
• 2 x 16 LCD display screen
• PS/2 mouse or keyboard port
• VGA display port
• 10/100 Ethernet PHY (requires Ethernet MAC in FPGA)
• Two 9-pin RS-232 ports (DTE- and DCE-style)
• On-board USB-based FPGA/CPLD download/debug interface
• 50 MHz and 66 MHz clock oscillators
• SHA-1 1-wire serial EEPROM for bitstream copy protection
• Hirose FX2 expansion connector with 40-user I/O
• Three Digilent 6-pin expansion connectors
• Four-output, SPI-based Digital-to-Analog Converter (DAC)
• Two-input, SPI-based Analog-to-Digital Converter (ADC) with programmable-gain
pre-amplifier
• ChipScope™ SoftTouch debugging port
• Rotary-encoder with push-button shaft
• Eight discrete LEDs
• Four slide switches
• Four push-button switches
• SMA clock input