Need help?Do you have a question about the Xilinx VCU1525 and is the answer not in the manual?
General| Brand | Xilinx |
|---|---|
| Model | VCU1525 |
| Category | Microcontrollers |
| Language | English |
Provides a general overview of the VCU1525 platform and its applications.
Presents a visual representation of the VCU1525 board's main components and their interconnections.
Lists the key features and specifications of the VCU1525 board.
Details the physical dimensions, environmental operating conditions, and voltage requirements.
Identifies and locates key components on the VCU1525 board.
Specifies the default configurations for the board's switches.
Provides instructions for physical installation of the board into a server.
Explains the methods for configuring the FPGA on the VCU1525 board.
Introduces the chapter's content detailing board components and features.
Details the main FPGA chip on the VCU1525 board.
Describes the voltage rails powering the FPGA's I/O banks.
Explains the DDR4 memory interfaces and their specifications.
Details the onboard Quad SPI flash memory used for configuration.
Explains how to configure the FPGA via USB JTAG.
Describes the USB-to-UART bridge for serial communication.
Details the various clock sources provided on the board.
Explains the system clock and QSFP0 clock generation.
Details the clock generation for the QSFP1 interface.
Describes the programmable clock sources for MGT and user applications.
Explains the high-speed GTY transceivers and their connectivity.
Details the board's connection to the PCIe bus.
Describes the QSFP+ connectors for high-speed networking.
Explains the I2C bus networks used for communication.
Describes the status LEDs on the board.
Details user-accessible I/O capabilities like DIP switches.
Describes the BMC responsible for board management.
Details the power system architecture and voltage regulators used on the board.
Explains the VCCINT power circuit and its incremental increase stages.
Describes the fan connector and its autonomous speed control mechanism.
Introduces the XDC file template and its purpose.
Introduces the EU directives and standards the product conforms to.
States the declaration of conformity status for the Virtex UltraScale+ VCU1525.
Lists relevant EU directives, including LVD and EMC.
Mentions the maintenance of EN and IEC standards.
Details EMC standards and product class.
Lists safety standards for information technology equipment.
Explains compliance markings like WEEE, RoHS, and CE.
Points to Xilinx support resources like Answers and Forums.
Guides users to Xilinx Solution Centers for design support.
Explains how to access Xilinx documentation via DocNav and Design Hubs.
Lists websites for updated information and supplemental materials.
Contains critical legal disclaimers and terms of use for Xilinx products.
To Next Page
