Xinje OP325-A - 3-4-3．Cable Connection

22
parameters
Baud rate 9600
4800/38400/9600/115200
/19200/187500
Accord with PL
C port
parameters
Station no. 0 0~255
The default parameters of Omron CP/CJ/CS series: 9600, 7, 2, even parity, station no.0
(2) Omron CPM/CQM series
OP software settings:
Parameters Recommend
settings
Choices of settings Notes
PLC type Omron
CPM/CQM series
Omron CP/CJ/CS series
Omron CPM/CQM series
Choose correct PLC type in
OP20
Port RS232 RS232
Data bit 7 7/8 Accord with PLC port
parameters
Stop bit 2 1/2 Accord with PLC port
parameters
Parity
Even parity
Even /odd/no parity
Accord with PLC
port
parameters
Baud rate
9600
4800/38400/9600/115200
/19200/187500
Accord with PLC port
parameters
Station no.
0
0~255
The default parameters of Omron CPM/CQM series PLC: 9600, 7, 2, even parity, station no.0
3-4-3．Cable connection
1. CPU RS232:
OP Omron CPM/CQM series CPU
9-pin D-type female port 9-pin D-type male port
（Diagram 1— fit for OP all series）