TH series Touchscreen User Manual Page 19 of 81 MANUL018R2V1
Step:
Make sure your PC has serial port or USB port ( use USB converter tool), connect it with COM1, then
click in the software to download data. The pins definition is shown as below:
PC serial port TH COM1 port
1. Turn on switch2 when TH power supply is cut off
2. Power on TH, connect TH with PC via Xinje download cable to download project
3. After the download process is over, cut off the power of TH, then turn off the switch2
4. Power on the TH again, the project will run normally
To Next Page
Loading...