Xinje TH765-M - Part

TH series Touchscreen User Manual Page 36 of 81 MANUL018R2V1
5-2-2-4 Part
5-2-2-5 Tool
Option:
The “part” is used to edit the TH project, it is the
same as the tool bar in the software.
Tool menu is the same as the following tool bar.
Grid size:
1. Move Grid: set the min pixel when
moving the element.
2. Grid radio: the grid density, the
smaller the value is, the denser the grid
is.
3. Auto save: auto save the project at
the time you set.
4. Download: select the project
download com port.
5. Download all: when you want to
upload the data, please select this item
before you download the data into TH.
6. Display mouse cursor: display the
mouse connected to TH USB port.