TH series Touchscreen User Manual Page 31 of 81 MANUL018R2V1
PFW set:
Step1:
Set the PFW register range, click “Add” to add the register in the list.
Change the range then click “Modify”, it will show below message, click „Yes” to confirm the modify.
Step2:
Set the value in the range
Double click the PFW range, it will show data setting window:
Step3:
Download the project into TH.
Note:
PFW0~PFW256 are occupied by the TH system, please select register start from PFW257.
1. Display number can select decimal
or hex.
2. Set FF: set all the data to FFFF.
3. Reset 0: set all the data to 0.
To Next Page
Loading...