Device ID: the device number of import
device
Dynamic set: set the device ID in D
register.
Import control: control the import process
by M coil, when M is ON, the import
process starts.
Path/File: the CSV file name
Fix name: the import data are from the
same source file
Add ID after name: set the import file
name by the input value or the value in D
register.
Start ID: the import data head number.
Dynamic set: can set the head address in
D register.
7-4-2 Import the C SV data
The purpose is to import the data from the SD card or U disk to TH register.
Step1:
Use function button or function field , select import CSV data function.
Step2:
Double click import CSV data, change the parameters as the following:
1. Source path tab
Please see the following picture: the import data when select start ID to 5 and 10.
To Next Page
Loading...