Xinje TS Series User Manual

11
In addition, connecting high voltage or alternating current to the power input terminal in the HMI will make the
equipment unusable and may cause electric shock to the human body. Such mistakes or serious electric shock can
lead to personal injury, even death, and equipment damage.
【Note】:
If the PLC DC output is used to drive the HMI, it must be considered that the +24V DC output of some controllers may
not have enough current to support it.
+DC-
0 V
+24V

Xinje TS Series Specifications

General

Brand	Xinje
Model	TS Series
Category	Touch Panel
Language	English