Xinje XP2-18R User Manual

26
XP2/XMP2 and XP3/XMP3 series:
Range Point
Soft
component
Name
XP2/XMP2 XP3/XMP3 XP2/XMP2 XP3/XMP3
X Input point X000~X011(octal) 10
Y
Output
point
Y000~Y007(octal) 8
M0~ M2999
【M3000~M7999 】
8000
M
Auxiliary
relay
M8000~M8767 768
S Status
S0~ S511
【S512~M1023 】
1024
T0~T99：100ms not accumulation
T100~T199：100ms accumulation
T200~T299：10ms not accumulation
T300~T399：10ms accumulation
T400~T499：1ms not accumulation
T500~T599：1ms accumulation
T600~T618：1ms with interruption precise time
T Timer
T620~T639：vacant
640
C0~C299：16 bits forth counter
C300~C318：32 bits forth/back counter
【C320~C598】：32 bits forth/back counter
【C600~C619】：one phase high speed counter
【C620~C629】：
Pulse + direction high speed
counter
C Counter
【C630~C639】：AB phase high speed counter
640
D0~D999
【D4000~D4999】
D0~ D3999
【D4000~D7999】
2000 8000
D
Data
register
For special using
D8000~D8511
D8630~D8729
For special using
D8000~D9023
612 1024
FD0~FD127 FD0~FD1535 128 1536
FD
FlashROM
register
For special using
FD8000~FD8383
For special using
FD8000~FD8511
384 512
ED
Extend data
register
- 【ED0~ED16383】 - 16384
NOTE:
※1. The memorizer area in 【 】 is the defaulted power failure retentive area, the power
failure retentive area of soft components D, M, S, T, C can be set via FD register. For
the details, please see the following table.
※2. Flash ROM register needn’t set power failure retentive area, its data won’t lose when

Xinje XP2-18R Specifications

General

Brand	Xinje
Model	XP2-18R
Category	Controller
Language	English