3.5 Device Mounting Guidelines
The XT4970D Series devices leverage solar energy to replenish the charge of its battery. Please
consider the device mounting guidelines to maximize device solar charging. Also, the XT4970D
series uses cellular and GPS technologies whose signal reception quality is depending on
mounting location and style. Adhering to these guidelines will optimize the field performance of
the XT4970D:
If possible, have the solar panel facing directly towards the noon sun. At least have the
solar panel no greater than 90° away from the noon sun.
Avoid mounting the XT4970D were shadows may cast upon the solar panel
Avoid placing unit inside a container made from any conductive materials or partially
mounted into a bracket made from any conductive materials. Doing so may potentially
degrade GPS and cellular reception.
Avoid mounting the XT4970D in low locations where dirt, grease, or any other staining
particles can be introduced by rotating wheels. Excess dirt, grease, or staining materials on
the solar panel will reduce the amount of charge the device can receive.
Avoid mounting the XT4970D to locations that are high risk to predictable physical harm.
(I.e. do not mount the unit on the top of an asset if snow scrapers are utilized in periodic
maintenance of the asset without some sort of protective bracket)
To Next Page
Loading...
Need help?
General
