Xirrus X2 Series User Manual

Wireless Access Point
555
Safety Warnings
Translated safety warnings appear on the following page.

This Appendix contains Notices, Warnings, and Compliance information for
the XD and XR500/600 Series only. For other models, see the notes under
“Notices (XR-1000 to XR-6000 Indoor Models)” on page 563.
!
Safety Warnings
Read all user documentation before powering this device. All Xirrus
interconnected equipment should be contained indoors. This product is
not suitable for outdoor operation. Please verify the integrity of the
system ground prior to installing Xirrus equipment. Additionally,
verify that the ambient operating temperature does not exceed 50°C
(40°C for the XR500/600 Series).
!
Explosive Device Proximity Warning
Do not operate the XR Series Wireless AP near unshielded blasting caps
or in an explosive environment unless the device has been modified to
be especially qualified for such use.
!
Lightning Activity Warning
Do not work on the XR Series Wireless AP or connect or disconnect
cables during periods of lightning activity.
!
Circuit Breaker Warning
The XR Series Wireless AP relies on the building’s installation for over
current protection. Ensure that a fuse or circuit breaker no larger than
120 VAC, 15A (U.S.) or 240 VAC, 10A (International) is used on all
current-carrying conductors.

Xirrus X2 Series Specifications

General

Model	Xirrus X2 Series
Category	Wireless Access Point
Mounting Options	Ceiling, Wall
Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Power over Ethernet	802.3af PoE
Antenna Type	Internal
Security Features	WPA2
Management	Cloud-based