OPTIONAL ACCESSORIES:
www.xoappliance.com
MOUNT ADAPTOR: Part # XODISEADAPTER
The Mount Adapter is designed to help you retrofit three bolt mounting systems when the existing hardware
will be re-used. It can only be used with CONTINUOUS FEED Disposers.
In this case after the old disposer is unbolted, the Mount Adapter is bolted into place and the Mount Ring
and Cushion Mount are used to connect the disposer following the installation instructions starting at STEP (h)
on the opposite page.
REMOTE AIR SWITCH: Part # XODAIRSWITCH
The Remote Air Switch is a simple, reliable way to have a convinient activation switch next to the sink for
your Disposer. Because the push buttom works using air pressure, it keeps electricity away from the area
immediately around the sink, so it is inherently safer. It is only used with CONTINUOUS FEED Disposers.
The product is easily installed and comes with two different, popular button finishes to match your decor.
Simply install the Push Button through a hole drilled in the counter, mount the Switch Box proximate to the
outlet and run a small Air Tube between the two. After you have finished your Disposer installation - plug
the Switch Box into the outlet and the Disposer into the Switch Box. There is no internal re-wiring required.
INCLUDES TWO OF THE MOST
POPULAR FINISH PUSH BUTTONS
Stainless Steel Bright Chrome
WHAT IS INCLUDED:
1. Switch Control Box
(disposer plugs into box/box plugs into wall outlet)
2. Air Tube (connects switch & push button)
3. Push Button (mounts in counter)
1
2
3
To Next Page
Loading...
Need help?
General