EasyManuals Logo

Xomax XM-CDB619 User Manual

Xomax XM-CDB619
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Topic:
XOMAX
XM-CDB619
Installation
EN
impedance of 4-8 Ohm and a sufcient
wattage.
Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
If the vehicle doesn't have an "ACC"
ignition position, please connect the
red cable with the ignition switch.
Otherwise the unit does not turn off
automatically, causing the discharging
of the vehicle battery.
To avoid a rogue and hazardous short
circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
Do not ever connect the negative
speaker cables with the vehicle body.
To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xomax XM-CDB619 and is the answer not in the manual?

Xomax XM-CDB619 Specifications

General IconGeneral
BrandXomax
ModelXM-CDB619
CategoryCar Receiver
LanguageEnglish

Related product manuals