Xpand YOUniversal User Manual

Getting Started
What’s Included
•One(1)YOUniversalElectronic3DEyewear
•One(1)GlassesCase
•One(1)MultifunctionporttoUSBcable
•One(1)MicroberCloth
•Two(2)Nosepieces
Compatibility
XPANDYOUniversal3Dglassesarecompatiblewithallmajorbrandsof3DLCDTVs,3D
DLPTVsand3DPlasmaTVsthatuseIRsynchronisationwith3Deyewear(glasseswon’t
workwithTVs,laptopsandprojectorsthatuseRFfor3Dsyncsignalorpassivedisplays).
ForYOUniversal3DGlassestoworkwithTVsthatuseradiofrequencyfor3Dsyncsignal,
XPAND’s RF Dongle (radio frequency extension) is necessary. It is available as extra
accessory.
Additionally XPAND equipped cinemas and some 3D capable personal computers are
supportedaswell.
Warranty
1-yearlimitedproductrepair/replacementwarranty.Fordetailedwarrantystatementvisit
www.xpand.me/youniversal/
Functionality
Glasses Overview
(1) Button (ON, OFF, IR protocol
selection)
(2)BatteryLEDlight
(3)“X”LEDlight
Turning On/Off Your Glasses
•Step1ON:Pressbutton(1)once
•Step2“X”LEDlight(3)willrampfromofftobright
•Step3OFF:Pressbutton(1)once
•Step4“X”LEDlight(3)willrampfrombrighttooff
Glassesalsoautomaticallyturnoffifnovalidsyncisdetectedfor5minutes.
Set Glasses To Operate With Your Device
•Step1XPANDYOUniversal3DglassessupportanautomaticIRprotocoldetection.To
starttheautodetectprocess,pressandholdthebutton(1)for3seconds.
•Step2»X«LED(3)willblinkuntilautodetectioniscompleted.Proceduremaytakeupto
oneminute.
•Step3Ifautodetectionwascompletedsuccessfully,sitbackandenjoyyourprogram.The
glasseswillstoredetectedIRprotocolinmemoryandwillalwaysstartupinthismodethe
nexttimeyouturntheglasseson.
Select Device Manually
•Step1Pressandholdthebutton(1)for3seconds.Glasseswillenterautodetectmode.
•Step2Pressandholdthebutton(1)for6seconds.
•Step3“X”LEDlight(3)willblinkonce,correspondingtoaSamsungTV(Seesupported
IRprotocolcodesbelow).
•Step4Pressbuttononcetostepthroughtheotherdeviceoptionsuntilyougettodesired
IRprotocol.
•Step5IfyouhaveselectedthecorrectIRprotocolthensitbackandenjoyyourprogram.
Within30secondstheglasseswillexittheprogrammingmodeandstoreyourselectionin
memory.Theglasseswillalwaysstartupinthismodethenexttimeyouturntheglasses
on.
Supported IR Protocol Codes
•Samsung*orMitsubishi** 1Blink
•LG* 2Blinks
•Sony** 3Blinks
•PanasonicorM-3DIdevices 4Blinks
•Philips*orHPorJVC 5Blinks
•XPANDEmitter 6Blinks
•Nvidia 7Blinks
•Vizio 8Blinks
•BangandOlufsen 9Blinks
•Sharp 10Blinks
•Acer 11Blinks
•XPANDCinema (enteredautomaticallywheneversyncispresent)
*LG2011TVmodelsarenotsupported,whereasSamsung2011TVmodelsrequireXPANDRF
Dongle.
**SomeTVmodelsrequiretheuseofexternalemitter;pleasecheckwithyourTVmanufacturer.
Set Glasses for use in XPAND Equipped Cinemas
SimplyturntheglassesonandXPANDCinemamodewillbeenteredautomatically.
Indicating Battery State
IfredbatteryLED(2)asheseverycoupleofseconds,batterylevelislow.LEDindicateslow
batterystateonlywhenglassesareturnedon.
ChargingisindicatedwithorangebatteryLED(2)ashingeverysecond.
Whenbatteryisfullycharged,batteryLED(2)turnsgreen.
Charging the Battery
Tochargeglasses,plugthemultifunctionporttoUSBcabletomultifunctionportonone
sideandincomputerorotherUSBdevicecapableofsupplyingpower(wallcharger)on
theother.OrangebatteryLED(2)willashwhilecharging.Whenbatteryisfullycharged,
batteryLED(2)isilluminatedgreenuntilpowersupplyisremovedfromtheglasses.
Pleasemakesurethebatteryisfullychargedbeforerstuseoftheglasses.
Connecting Glasses to a PC
ByconnectingglassestoaPCandusingtheXPANDPCapplication,onecaneasilychange
desiredIRprotocol,customsetshutterstimingsandupgradeglassesrmware.Toaccess
these settings, XPAND PC application has to be installed on the PC. The app can be
downloadedfromwww.xpand.me/youniversal/.
To select desired IR protocol,connectmultifunctionporttoUSBcabletothe
glassesandPC.RunXPANDPCapplication.Selectprotocolfromdropdownmenu.Unplug
multifunctionporttoUSBcablefromtheglasses.Theglassesarenowset.
To change advanced shutter timings,clickon“Showadvancedoptions”.In
XPANDPCapplicationclickanddragtwoslidescorrespondingto“opendelay”and“close
delay” and setdesired timings. To discard anychanges madeclick “Reset to default”
button.Advancedoptionmenuisclosedwithclickon“Hideadvancedoptions”.
To upgrade firmwareontheglassesturnglassesonandplugmultifunctionportto
USBcabletothePCandontheotherendtotheglasses.LaunchtheXPANDPCapplication
andclickonthe“Applicationupdateavailable”or“checkforupdate”button.Ensurethat
thePCisconnectedtotheInternet.Theglasseswillbeupdatedfromserverautomatically
onconrmingthatyouwanttoupdateglasseswithnewestrmware.Ifyouwanttoupdate
fromle,click“No”inthe“Downloadrmware”dialogboxandthenchoosethedesiredle.
Updatetakessometime.Whentheoperationiscomplete,adialogboxconrmssuccessful
update.DonotunplugmultifunctionporttoUSBcableduringupdateprocess!
Eyewear Specifications
ProductWeight:1.55oz(46g)-smallandmediumsize;1.66oz(47g)-largesize
PowerSupply:Batterytype:RechargeableLithium-ionPolymer3.7Vdc/0.135A
OperatingTemperature:5ºC(41ºF)–40ºC(104ºF)
Multifunction
Port

Xpand YOUniversal Specifications

General

Brand	Xpand
Model	YOUniversal
Category	3D Glasses
Language	English