Xpelair DX100R User Manual

Xpelair Simply Silent
TM
DX100 Fan
Installation and Maintenance Instructions
DX100R (93005AW) / DX100S (93025AW) Standard
DX100TR (93006AW) / DX100TS (93026AW) Timer
DX100PR (93007AW) / DX100PS (93027AW) Pull Cord
DX100HTR (93008AW) / DX100HTS (93028AW) Humidistat, Timer
DX100HPTR (93009AW) / DX100HPTS (93029AW) Humidistat, Pull Cord, Timer
DX100PIRR (93010AW) / DX100PIRS (93030AW) Integral Body Movement Sensor
 Do read the entire instruction leaflet before commencing installation.
 Do install each fan with a means for disconnection in all poles in the fixed wiring.
 Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any
maintenance or cleaning.
Please leave this leaflet with the fan for the benefit of the user.
UK customers:
If you have any queries before or after installing this product call the Xpelair Technical Hotline +44 (0) 844 372 7766. Our
engineers are there to help you during normal office hours. Or you can fax at all other times on +44 (0) 844 372 7767.
Customers outside the UK should contact your local Xpelair distributor.
DX100 Range Round Fan
DX100 Range Square Fan

Xpelair DX100R Specifications

General

Brand	Xpelair
Model	DX100R
Category	Fan
Language	English

Summary

Installation and Maintenance Instructions

Adjusting Fan Settings

Adjusting the Humidity Setting

Guide on how to adjust the humidity sensitivity (RH) for automatic fan operation.

Adjusting the Run On Timer Setting

Guide on how to adjust the fan's run-on timer delay after the trigger is removed.

Wiring and Setting Up

Wiring for DX100R, DX100S, DX100PR, DX100PS

Wiring diagram and speed setting jumper configuration for specific fan models.

Wiring for DX100TR, DX100TS

Wiring diagram and over-run timer adjustment for specific fan models.

Wiring for DX100HTR, DX100HTS

Wiring, speed setting, humidity, and timer adjustments for specific fan models.

Wiring for DX100HPTR, DX100HPTS

Wiring, speed setting, humidity, and timer adjustments for specific fan models.

Wiring for DX100PIRR, DX100PIRS

Wiring and speed setting jumper configuration for motion sensor fan models.

Installation Guidelines

Wall Mounting Installation

Ceiling Mounting Installation

Window Mounting Installation

Electrical Connection Safety and Procedure

Safety precautions, cable requirements, and installation steps for electrical connections.

Final Electrical Connections

Steps for installing isolating and on/off switches and making final connections.

Fan Preparation for Installation

Marking Back-Plate Position

Mounting the Back-Plate

Fan Operation

Speed Setting

Adjusting Humidity and Timer Settings