To Next PageTo Next Page
Need help?Do you have a question about the Xpelair DX100HTS and is the answer not in the manual?
General| Type | Extractor Fan |
|---|---|
| Airflow | 100 m³/h |
| Power Consumption | 20 W |
| Voltage | 230 V |
| Aperture diameter | 100 mm |
| Wattage | 20 W |
| IP Rating | IPX4 |
| Frequency | 50 Hz |
| Noise Level | 34 dB(A) |
| Dimensions | 204 x 204 x 133 mm |
| Application | Bathroom, Kitchen |
Provides key physical dimensions for the DX100 fan models, including round and square variants.
Explains how to adjust the humidity sensitivity and trigger level for automatic fan operation.
Details how to set the fan's post-operation run-on time for ventilation after humidity drops.
Provides advice on optimal fan placement for effective ventilation, considering airflow and heat sources.
Lists necessary tools and materials required for the proper installation of the fan.
Covers requirements for isolating switches, cable types, and mains supply connections.
Instructions for preparing the fan, mounting the back-plate, and fitting the back draft shutter.
Step-by-step guide for wiring the fan, including mains supply and switch connections.
Details on setting fan speed, humidity, and timer, and how to use different fan models.
Recommended monthly cleaning procedures and guidelines for product disposal.
Outlines the product guarantee terms, exclusions, and contact details for UK customers.
Provides contact information for technical advice, sales, spares, and international support.
