Xpelair DX100S User Manual

Xpelair Simply Silent
TM
DX100 Fan
Installation and Maintenance Instructions
DX100R (93005AW) / DX100S (93025AW) Standard
DX100TR (93006AW) / DX100TS (93026AW) Timer
DX100PR (93007AW) / DX100PS (93027AW) Pull Cord
DX100HTR (93008AW) / DX100HTS (93028AW) Humidistat, Timer
DX100HPTR (93009AW) / DX100HPTS (93029AW) Humidistat, Pull Cord, Timer
DX100PIRR (93010AW) / DX100PIRS (93030AW) Integral Body Movement Sensor
 Do read the entire instruction leaflet before commencing installation.
 Do install each fan with a means for disconnection in all poles in the fixed wiring.
 Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any
maintenance or cleaning.
Please leave this leaflet with the fan for the benefit of the user.
UK customers:
If you have any queries before or after installing this product call the Xpelair Technical Hotline +44 (0) 844 372 7766. Our
engineers are there to help you during normal office hours. Or you can fax at all other times on +44 (0) 844 372 7767.
Customers outside the UK should contact your local Xpelair distributor.
DX100 Range Round Fan
DX100 Range Square Fan

Xpelair DX100S Specifications

General

Airflow	100 m³/h
Installation Type	Wall/Window
Dimensions	200 x 200 x 100 mm
Voltage	230 V
Material	Plastic
Control	Pullcord
Timer	No
Shutter	No
Frequency	50 Hz
Application	Bathroom
Mounting	Surface
Type	Extractor fan

Summary

Installation and Maintenance Instructions

DX100 Fan Model Identification

Appliance Safety and Specifications

User Safety Precautions

Important safety information regarding the use of the appliance by children and persons with reduced capabilities.

DX100 Fan Features Overview

Fan Settings Adjustment

Humidity Setting Control

Instructions on how to adjust the humidity sensor sensitivity for automatic operation.

Run-on Timer Setting Control

Guide for adjusting the fan's run-on timer delay from 30 seconds to 30 minutes.

Wiring and Setup (Models G1)

DX100R, DX100S, DX100PR, DX100PS Wiring

DX100TR, DX100TS Wiring

Wiring and Setup (Models G2)

DX100HTR, DX100HTS Wiring and Settings

Wiring and setup details for DX100HTR/HTS, including humidity and timer adjustments.

DX100HPTR, DX100HPTS Wiring and Settings

Wiring and setup details for DX100HPTR/HPTS, including humidity, timer, and motion sensor.

Wiring and Setup (Model G3)

DX100PIRR, DX100PIRS Wiring and Settings

Wiring and setup instructions for DX100PIRR/PIRS models with integral movement sensor.

Installation Prerequisites

Fan Location Guidance

Recommendations for optimal fan placement to ensure effective ventilation and airflow.

Installer Requirements

Installation Procedures

Electrical Installation and Cabling

Steps for installing isolating switches, cables, and making electrical connections safely.

Back Plate and Shutter Mounting

Wiring Electrical Connections

Fan Settings and Operation Modes

Speed Setting Selection

Adjusting Over-run and Humidity Settings

Instructions for adjusting the over-run timer and humidity levels for specific models.

Advanced Fan Operation Modes

Automatic and External Operation

Movement Sensor Operation

Product Guarantee and Support

Manufacturer's Guarantee (UK)

Technical Advice and Service Contact