English - 9
User Maintenance Instructions
(Continued)
Stack Multiple Units
• Stack the Air Circulators on the sides. Align the air
inlets of both Air Circulators.
WARNING
• For model FC-100 / FC-200, DO NOT stack more
than six units of this appliance.
• For model FC-300 / FC-420, DO NOT stack more
than five units of this appliance.
• Stacking function is not secure during
transportation.
!
Troubleshooting Guide
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
PROBLEM POSSIBLE CAUSE SOLUTION
Air Circulator does
not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The timer switch is set to “0”
position.
Set the timer switch to “ON”
position.
Unit runs but the
speed is abnormal
Air inlet or air outlet is blocked. Remove blockage.
To Next Page
Loading...
