What to do if my XPower Fan motor is not running?
If your XPower Fan's motor isn't running, first, ensure the unit is properly plugged in and the switch is in the ON position. If it still doesn't work, check the outlet or try a different outlet to rule out a power failure. For wiring failures, it's best to contact XPOWER for repair assistance.
Why is my XPower X-8 Fan making a scraping noise?
If your XPower Fan is making a scraping noise, it's likely due to obstructions at the intake or exhaust. Unplug the unit and carefully remove any obstructions. If the noise persists, it could indicate a broken fan, in which case you should contact XPOWER for repair.
How to improve weak airflow in my XPower X-8 Fan?
If your XPower Fan has weak airflow, the vents or inlets may be obstructed. Unplug the unit and thoroughly clean the vents and inlets to resolve this issue.
Addresses common issues like motor not running, noise, and weak airflow.
Details warranty service procedures for US users, including RMA and proof of purchase.
Addresses common issues like motor not running, noise, and weak airflow.
Details warranty service procedures for US users, including RMA and proof of purchase.
To Next Page
General
