Operation Instructions
No assembly is required for this unit. Prior to operating always check that the power cord is not
frayed or compromised, the unit is completely dry, and there is not any debris which would
obstruct the motor and/or fan blades.
1. Plug the electrical cord into the power outlet.
2. Carefully place the Axial Air Mover unit on a stable,flat dry surface.
3. Turn the switch to desired speed and make sure it is operating correctly.
4. To reduce the risk of injury, close supervision is necessary when the unit is used near children.
Do not allow children to play with or around the unit.
- 3 -
• DO NOT OPERATE FAN WITHOUT REVIEWING COMPLETE
OPERATION AND SAFETY INSTRUCTIONS
• Incorrect operation of unit can result in property damage, personal injury,
or even death. This unit is NOT designed to operate in an explosive or
flammable environment
CAUTION!
To Next Page
Loading...
Need help?
General
