Operation / Instructions
XPOWER Air Movers are intended to move air and to dry
floors, walls, furniture, etc. Durable and easy to operate with
an effective balance of static pressure and airflow, the units
are suitable for a variety of applications.
1.
XPOWER Air Movers are shipped ready to be put into service.
Prior to plugging the unit into the power source,
inspect completely for any shipping damage.
2. Plug the electrical cord into the
power outlet.
3.
Carefully place the Air Mover unit on a stable, flat dry surface.
4.
The unit has four air flow positions, capable to aim airflow
across flat surfaces or angled upward.
5. Turn the switch to desired speed and make sure it is
operating correctly.
6.
All Air Movers in operation must be supervised at all times.
AIR
MOVER
STORAGE:
Air Movers can
be stacked
(up to 4) on
their sides for
storage
.
NOTICE:
1.Stacking
feature is not
secure for
transportation.
2.Remove the
filters before
stacking.
To Next Page
Loading...
