1. Always turn off the printer
before cleaning the print head.
2. Allow the print head to cool for
a minimum of one minute.
3. Use a cotton swab (Head
cleaner pen) and
medicinal alcoho
l
to clean the print head surface.
Clean the print head when
changing a new label roll
1. Turn the power off.
2. Rotate the platen roller and
wipe it thoroughly with
medicinal alcohol and a cotton
swab
lint-free cloth.
Clean the platen roller when
changing a new label roll
Use cotton cloth to dipped in
medical alcohol to wipe
Use a gas brush or a vacuum
cleaner to remove dust from the
sensor
Wipe it with water-dampened
5. Maintenance
5.1 Cleaning
This session presents the clean tools and methods to maintain your printer.
Please use one of following material to clean the printer.
Cotton swab (Head cleaner pen)
Lint-free cloth
Vacuum / Blower brush
medicinal alcohol
The cleaning process is described as following
19
To Next Page
