26
SHOCK POSITION ADJUSTMENT
RIDE HEIGHT ADJUSTMENT
DROOP ADJUSTMENT
903308
SFH M3x8
981212
P 2x12
902306
SH M3x6
FRONT SHOCK
(LIGHT-PURPLE SPRING - US FOAM-SPEC)
L=R
FRONT SHOCK
(C3.0 SPRING - EU RUBBER-SPEC)
INITIAL POSITION
EU RUBBER-SPEC = US FOAM-SPEC
TECH TIP:
To make the car more stable and easier to drive, move the front shocks forward. Stability increases
mainly in chicanes. Note that the car will have less steering into corners.
• Upper mount (shock tower): Add a plastic nut and use a longer screw 3x8mm (NOT INCLUDED)
to space the upper end of the shock away from the shock tower.
• Lower mount (lower arm): Add shims and use a longer setscrew 3x10mm (NOT INCLUDED) on
the lower arms to space the lower end of the shock away from the arm.
7. FRONT & REAR ASSEMBLY
L=R
INITIAL POSITION
308019 Set of Shock
Shims & Nuts
To Next Page
Loading...
