Need help?Do you have a question about the Xray T4'21 and is the answer not in the manual?
General| Brand | Xray |
|---|---|
| Model | T4'21 |
| Category | Motorized Toy Car |
| Language | English |
Information on how to get help with difficulties, problems, or questions regarding the RC car.
General safety advice and important considerations for building and operating the RC model.
List of items included in the RC car kit.
List of essential equipment needed to operate the RC car.
Explanation of color coding used for parts descriptions and their relation to assembly steps.
Assembly steps for the composite solid axle component.
Assembly steps for the gear differential mechanism.
Advice on using the gear differential in the front and recommended oils.
Information on available offset spur gears for tuning the drivetrain.
Assembly of the long front suspension arms.
Assembly of the long rear suspension arms.
Assembly of the rear suspension arms.
Guide to using eccentric bushings for adjusting rear suspension geometry.
Guide to using eccentric bushings for adjusting front suspension geometry.
Assembly and adjustment of the steering links for proper car control.
Adjusting the servo link to connect the servo to the steering mechanism.
Installation and selection of drive shafts for optimal performance.
Assembly of the steering blocks and associated components.
Installation of the suspension uprights.
Assembly of the C-hub components for suspension tuning.
Installation and adjustment of front anti-roll bars for tuning.
Procedure for filling shock absorbers with oil and removing air bubbles.
Steps to adjust the shock absorber rebound for optimal suspension response.
Ensuring all shock absorbers are set to the same length for consistent performance.
Setting the orientation of the front body posts for optimal aerodynamics.
Adjusting the steering system for precise and responsive control.
Properly installing the battery backstop to prevent movement and ensure stability.
Tips on how to adjust the car to eliminate chassis tweak and improve handling.
Installing and adjusting body upstops for aerodynamic tuning.
Adjusting ARSâ„¢ for decreased toe-in, affecting cornering and traction.
Adjusting ARSâ„¢ for increased toe-in, affecting cornering and traction.
To Next Page
