Xray T3 2012 User Manual

Contact information and resources for assistance with the model.

Essential warnings and protective measures for safe assembly and operation.

Key guidelines and advice for building and operating the RC car.

Instructions for safe wiring, battery handling, and charging procedures.

Advice on fasteners, screws, and ensuring smooth part movement.

Details on product warranty, exclusions, and liability disclaimers.

Explanation of the graphical symbols employed throughout the manual.

List of necessary tools and additional RC components for assembly.

Meaning of colors used in diagrams to identify part sources.

Initial assembly steps for components that come partially pre-assembled.

Detailed steps for assembling the gear differential unit.

Instructions for assembling the composite solid front axle.

Recommended differential oils and their effects on traction and steering.

Guidelines for using the gear differential in the front for enhanced handling.

Available spur gear sizes for setting different gear ratios.

Guidance on installing and adjusting short and long drive belts.

Instructions on how to properly adjust the front drive belt tension.

Instructions on how to properly adjust the rear drive belt tension.

Selection guide for Hard vs. Extra-Hard rear suspension arms.

Selection guide for Hard vs. Extra-Hard front suspension arms.

Guidance on setting rear suspension roll center and toe-in.

Guidance on setting front suspension roll center and toe-in.

Connecting the steering servo to the linkage for proper function.

Adjusting the Ackermann angle for optimal steering response.

Fine-tuning the steering geometry for improved car handling.

Adjusting steering throw and chassis flex for performance.

Benefits and usage recommendations for optional ECS drive shafts.

Choosing appropriate uprights and steering blocks for suspension.

Options for wheel hubs and C-hub angles for suspension tuning.

Using optional 1-hole rear uprights for fine-tuning rear suspension.

Adjusting the steering linkage for optimal car handling.

Tuning anti-roll bars for improved stability and cornering.

Installation and adjustment of the rear anti-roll bar.

Chart detailing available front and rear anti-roll bar diameters.

Guide to selecting appropriate shock pistons and spring rates.

Step-by-step instructions for filling shock absorbers with oil.

Choosing the correct shock oil viscosity for desired damping.

Fine-tuning shock rebound and ensuring equal shock lengths.

Adjusting shock damping and proper installation of pivot balls.

Installing front shocks and using tech tips for optimal positioning.

Installing rear shocks and using tech tips for optimal positioning.

Mounting and aligning the steering servo for proper operation.

Installing the motor and setting the correct gear mesh.

Tuning suspension for optimal ride height and droop settings.