902306
SH M3x6
902306
SH M3x6
903306
SFH M3x6
Tighten the M3x6 screws carefully
so the ball-bearing will move
freely but without play.
Upper Deck
DETAIL
Rotate both front nylon hubs in arrow direction
(B)
Rotate both rear nylon hubs in arrow direction
(A)
L=R
L=R
L=R L=R
Rotate both front nylon hubs in arrow direction
(A)
Rotate both rear nylon hubs in arrow direction
(B)
Front diff lower position is recommended for large open
asphalt tracks with long sweepers.
Front diff upper position is recommended for tight and technical
carpet tracks. The upper diff position improves handling in
chicanes as it provides more traction, increased steering and
makes the car easier to drive.
Rear diff lower position is recommended for large open asphalt tracks
with long sweepers.
Rear diff upper position is recommended for tight and technical carpet
tracks. The upper diff position improves handling in chicanes as it provides
more traction, increased steering and makes the car easier to drive.
PLACE TAB IN THIS BOTTOM NOTCH
PLACE TAB IN THIS BOTTOM NOTCH
2x
NOTE ORIENTATION
OPTIONAL:
#303071 Belt Tensioner may be
used when the front belt becomes
worn and loose.
2. CENTRAL TRANSMISSION
To Next Page
Loading...
