19
HOW TO BUILD A PLAY
FREE STEERING
VIDEO TECH TIP
▶
HUDY MULTI-TOOL USE
VIDEO TECH TIP
▶
940508
BB 5x8x2.5
930306
BB 3x6x2.5
903308
SFH M3x8
2x
L=R
303129
SHIM 3x6x1
approx. 17mm
NOTE ORIENTATION
(outside)
NOTE ORIENTATION
(outside)
4mm THREAD
STEERING LINKS
SERVO LINK
Adjust servo link to fit your servo
26mm
INITIAL SETTING (1mm shim)
1mm 1mm 1mm 2mm
To change Ackermann angle, use 2 identical
shims (of same thickness) between the alu
steering plate and ball ends.
2x
2x
L=R
THREAD
THREAD
BEARING OIL
(HUDY #106230)
OIL
Install the pivot balls with Professional
Multi Tool (HUDY #183011)
#302612-O
ALU ADJ. TURNBUCKLE M3
L/R 39mm ORANGE - SWISS
7075 T6 (2)
#302610
ADJ. TURNBUCKLE L/R 40mm
HUDY SPRING STEEL (2)
3x6x2.5mm
5x8x2.5mm
Tighten the screws gently but fully, and then loosen 1/3
turn so the composite dual-servo saver moves freely.
➊ Tighten fully
➋ Loosen 1/3 ccw
➌ Check free movement
(120° CCW)
4. STEERING
THREAD
THREAD
OIL
NOTE
ORIENTATION
NOTE ORIENTATION
Long side = Ball joint open
#302547
ALU STEERING PLATE 8.5MM FOR DUAL SERVO SAVER - ORANGE
Optional 8.5mm alu steering plate improves steering response, but makes the car
more difficult to drive in chicanes. Recommended for small, technical tracks, or
tracks with many hairpin corners.
#302525
ALU DUAL SERVO SAVER ARM
#302525-K
ALU DUAL SERVO SAVER ARM
We recommend using the aluminum dual-servo saver arms when better steering
response is needed. Also recommended for asphalt tracks.
NOTE ORIENTATION
Ball joint open
NOTE ORIENTATION
Ball joint open
To Next Page
Loading...
