21
FLEX OPTIONS
VIDEO TECH TIP
▶
902306
SH M3x6
930306
BB 3x6x2.5
No bushing or bearing is used. This allows
maximum flex and provides maximum steering.
However, the car is less stable on-power.
The top deck is connected to the motor mount via
ball bearing. This setting eliminates a bit of steering
but improves stability.
The new feature of the top deck is the flex setting adjustment.
There are three different flex setting alternatives.
The top deck is connected to the motor mount via
bushing. This setting provides maximum stability as
it stiffens the entire car and eliminates flex to sides
and front/rear.
TOP DECK FLEX SETTINGS
MEDIUM
STIFF
INITIAL SETTING
(INITIAL SETTING)
We recommend using optional 1.6mm top deck for super-low traction conditions or in combination with
aluminum chassis as it provides more overall traction and steering.
#301063
T4’21 GRAPHITE TOP DECK 1.6MM
4. STEERING
SOFT MEDIUM STIFF
To Next Page
Loading...
