7
970050
O 5x1
970050
O 5x1
901308
SB M3x8
902303
SH M3x4
1.5 mm
UPPER ARMS
UPPER ARMS
LOWER ARMS
2x
INITIAL SETTING
2.0 mm
NOTE ORIENTATION
DETAIL
Professional Multi-Tool
(HUDY #183011)
INITIAL SETTING
6x
2x
2x
2x
2x 2x
1. FRONT SUSPENSION
5mm
COMPOSITE BALL
6.0mm
BALL END
SHORT COMPOSITE BALL
CUTAWAY VIEW
DETAIL
CUTAWAY VIEW
DETAIL
Remove excess material
DETAIL
19.5mm
DETAIL
6mm
ALU STAND
#372115
X1 GRAPHITE LOWER
SUSPENSION ARM 2.5mm
To improve steering in low-traction
conditions with standard F1 front tires.
Mount the front tube on the upper arm into the correct hole, depending on the front track-width.
If you use STANDARD TRACK-WIDTH, use the
outside holes on the upper arms.
If you use WIDE TRACK-WIDTH, use the inside
holes on the upper arms.
NOTE:
For more information about the TRACK-WIDTH alternatives see page 13.
To Next Page
Loading...
