19
DIRTCARPET
941014
BB 10x15x4
19
3. REAR DRIVETRAIN
2x
2x
L=R
940513
BB 5x12x4
902205
SH M2x5
980210
P 2x10
5x12x4mm
10x15x4mm
INITIAL SETTING
OPEN Bushings
L=R
L=R
902312
SH M3x12
Bearing with BLACK
rubber covers
GRAPHITE GREASE
(HUDY #106210)
HUDY Ball-Bearing
Grease
ALTERNATIVE ORIENTATION
OPTIONAL HEX HUB EFFECTS
Different offset hex hubs are used to increase or
decrease the track-width.
LESS OFFSET
Rear - more traction
Front - more steering
MORE OFFSET
Rear - less traction
Front - less steering
WHEEL HUBS 12MM
#365360 +4.5mm - 6 SLOTS OPTION
#365359 +3.75mm - 5 SLOTS OPTION
#365358 +3.0mm - 4 SLOTS OPTION
#365357 +2.25mm - 3 SLOTS INCLUDED
#365356 +1.5mm - 2 SLOTS OPTION
#365355 +0.75mm - 1 SLOT OPTION
#365353 0mm - 0 SLOTS OPTION
#365354 -0.75mm - Lightw. OPTION
#365361 -1.25mm - Lightw. OPTION
#325341 REAR ADJ. DRIVE AXLE LB - HUDY SPRING STEEL™
#
325390 ALU SHIM 10x12x2mm (2)
77mm
(3 Slots)
LOWER position
LOWER
UPPER position
Position of arms
Position
of arms
UPPER
XRAY BALL-BEARINGS
#940512 5x12x4 OIL OPTION
#941015 10x15x4 OIL OPTION
#940513 5x12x4 GREASE INCLUDED
#941014 10x15x4 GREASE INCLUDED
• CARPET
• Dry ASTRO
• DIRT very high traction
• DIRT low & high traction
• Wet ASTRO
We recommend for these types of surfaces and traction:
We recommend for these types of surfaces and traction:
UPRIGHT
ALTERNATIVE 1
UPRIGHT
ALTERNATIVE 2
L=R
INITIAL SETTING INITIAL SETTING
Upright
LOWER position
Upright
UPPER position
• CARPET
• ASTRO
• DIRT very high traction
• DIRT low & high traction
• WET ASTRO
2x
4x
4x
2x
2x
REAR UPRIGHTS
#323354-M MEDIUM UPPER INCLUDED
#323357-M MEDIUM LOWER INCLUDED
#323354-H HARD UPPER OPTION
#323354-G GRAPHITE UPPER OPTION
#323357-G GRAPHITE LOWER OPTION
#323355 ALU HIGH UPPER OPTION
#323356 ALU LOW LOWER OPTION
Position
To Next Page
Loading...
