DIRTCARPET
29
6. SHOCK ABSORBERS
363240 BALL UNIVERSAL 5.8mm WITH BACKSTOP (2)
363242 PIVOT BALL 5.8mm ECCENTRIC (2)
368013 COMPOSITE SHOCK PARTS FOR 2 SHOCKS - BIG BORE
368032 SHOCK PISTONS - COMPLETE SET - DELRIN - BIG BORE
368049 ALU SHOCK ADJUSTABLE NUT - BIG BORE (2)
368042 COMPOSITE SHOCK BUSHING & SHIM (2+2)
368101 FRONT SHOCK ABSORBERS - BIG BORE - SET (2)
368122 ALU FRONT SHOCK BODY - BIG BORE (2)
368140 ALU LOWER SHOCK BODY CAP (2)
368161 FRONT HARDENED SHOCK SHAFT 42mm (2)
368201 REAR SHOCK ABSORBERS - BIG BORE - SET (2)
368222 ALU REAR SHOCK BODY - BIG BORE (2)
368262 REAR HARDENED SHOCK SHAFT 47mm (2)
902205 HEX SCREW SH M2x5 (10)
965023 E-CLIP 2.3 (10)
363240
902205
368032
965023
368262
368222
970080
973030
368140
368049
368483
368482
368481
368482
368013
368013
970131
368161
965023
368122
970150
368032
368383
368382
368013
368042
363242
BAG
DIRT
CARPET
368382 FRONT CONICAL SPRING-SET L=42.5mm - 2 DOTS (2)
368383 FRONT CONICAL SPRING-SET L=42.5mm - 3 DOTS (2)
368482 REAR CONICAL SPRING-SET L=57.5mm - 2 DOTS (2)
368483 REAR CONICAL SPRING-SET L=57.5mm - 3 DOTS (2)
368381 FRONT CONICAL SPRING-SET L=42.5mm - 1 DOT (2)
368382 FRONT CONICAL SPRING-SET L=42.5mm - 2 DOTS (2)
368481 REAR CONICAL SPRING-SET L=57.5mm - 1 DOT (2)
368482 REAR CONICAL SPRING-SET L=57.5mm - 2 DOTS (2)
970080 O-RING 8x1 (10)
970131 O-RING 13 x 1.0 (10)
970150 O-RING 15 x 1.5 (10)
973030 SILICONE X-RING PRE-OILED 3x2 (10)
FRONT SPRINGS
#368381 L=42.5mm 1 DOTS INCLUDED
#368382 L=42.5mm 2 DOTS INCLUDED
#368382 L=42.5mm 2 DOTS INCLUDED
#368383 L=42.5mm 3 DOTS INCLUDED
#368384 L=42.5mm 4 DOTS OPTION
#368385 L=42.5mm 5 DOTS OPTION
REAR SPRINGS
#368481 L=57.5mm 1 DOTS INCLUDED
#368482 L=57.5mm 2 DOTS INCLUDED
#368482 L=57.5mm 2 DOTS INCLUDED
#368483 L=57.5mm 3 DOTS INCLUDED
#368484 L=57.5mm 4 DOTS OPTION
#368485 L=57.5mm 5 DOTS OPTION
#104004
HUDY AIR VAC - VACUUM PUMP
- 1/10 OFF-ROAD
368381
368382
2.5mm / ø1.6mm
2.5mm / ø1.6mm
2.0mm / ø1.6mm
2.0mm / ø1.6mm
2.0mm / ø1.8mm
2.0mm / ø1.8mm
2.5mm / ø1.8mm
2.5mm / ø1.8mm
2.5mm (Create custom holes)
(0mm - use required drill pin)
2.5mm (Create custom holes)
(0mm - use required drill pin)
Thin Shim
Thin Shim
Thick Shim
Thick Shim
These pistons can NOT be used in shocks without
making the custom holes by yourselves.
+4mm
#368011
COMPOSITE SHOCK BALL JOINT +2mm & +4mm (2+2)
+2mm
#368033
PRECISION GROUND SHOCK PISTON
BLANKS 2.5MM - BIG BORE (4)
#368034 PRECISION GROUND SHOCK
PISTON BLANKS 2.0MM - BIG BORE (4)
PISTONS DETAIL
#368054
ALU SHOCK CAP-NUT - BIG BORE (2)
#368021
ALU SHOCK SPRING RETAINING COLLAR (4)
#368022
ALU SHOCK SPRING RETAINING COLLAR -2mm (4)
#368023
ALU SHOCK SPRING RETAINING COLLAR -4mm (4)
1mm 2mm 3mm
#306219
DOWNSTOP SHIMS
THICKER shim used, GREATER
downstop is achieved.
368032
SHORT
SHORT
LONG
LONG
DIRT
DIRT
DIRT
DIRT
CARPET
CARPET
CARPET
CARPET
To Next Page
Loading...
