DIRTCARPET
VELCRO™ TAPE WITH
DOUBLE-SIDED TAPE
Velcro™ tape - soft side
Velcro™ tape - hook side
44
7. FINAL ASSEMBLY
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
➊
➋
➌
➎
➏
➐
➑
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
XRAY LEXAN BODY
#329714 0.75mm DELTA 2D INCLUDED
#329715 0.50mm DELTA 2DL OPTION
#329716 0.75mm DELTA 2C INCLUDED
#329717 0.50mm DELTA 2CL OPTION
DIRT
CARPET
To Next Page
Loading...
