Xray XB8E'21 - 6. FRONT REAR ASSEMBLY; GRAPHITE BRACE SET for extra stiffness adjustment.; During assembly, there is no need to check gear mesh or diff play.

26
6. FRONT & REAR ASSEMBLY
902335
SH M3x35
902340
SH M3x40
903412
SFH M4x12
960030
N M3
960030
N M3
960040
N M4
DETAIL
903412
SFH M4x12
M3
M4
#353280
GRAPHITE BRACE SET for extra stiffness adjustment.
Push the top of the holder
with fingers together to insert
the brace with body post.
During assembly, there is no need to check gear mesh or diff play. In particular, do
not check gear mesh and diff play when the differential is installed only in the gear
box without the suspension holders and without being mounted to the chassis. All
parts have specifically designed play, and only when the car is fully assembled will
it have the proper amount of play where necessary. Only once you build the entire
car, then you can check for free movement of all rotational parts and drivetrain as
well a free non-binding operation of suspension parts.