B1
B2
Missing Parts?
Contact X Rocker Support:
WWW.XROCKERGAMING.COM
WIRED CONNECTION
B1
TV/Mobile/Tablet
WIRED CONNECTION
TV & Tablets (ALL CONSOLES)
CONNECT BY CONTROLLER
PS4 SYSTEMS ONLY
1. Connect B1 Cable to X Rocker control panel
3.5mm INPUT socket.
2. Connect other end of the B1 cable to the TV
headphone socket.
3. Once connected to your TV, increase volume to
50% of the maximum for the best sound level.**
*If your TV does not feature a headphone socket then
you may need to purchase an additional TOSlink
adapter to get connected directly to a console for
audio.
**Depending on your TV you may need to increase
the headphone volume separately in the TV sound
settings.
1. Connect B1 Cable to the bottom of the PS4
controller via the headset socket.
2. Connect the other end of the B1 cable to the chair
via the green port.
3. With the PS4 turned on and in the main menu,
press and hold the black PS button until the quick
menu appears.
4. In this menu select [Adjust Sound and Devices]
5. Then select [Output to Headphones]
6. Change the setting from [Chat Only] to [All Audio]
7. Make sure the volume in the previous menu is set to
the maximum.
1.
Bluetooth settings, turn Bluetooth on if it is not
on already, and search for
passcode is required, the four digit code will be
‘
2.
on the panel will light up.
2.1 BLUETOOTH
®
USER MANUAL - ENGLISH
B1
B3
NEED HELP?
EMAIL: SUPPORT@XROCKERGAMING.COM
WWW.XROCKERGAMING.COM
IMPORTANT: Y
ou must keep your original retail receipt as proof of purchase.
B1
B1
No power going to control panel
No Sound
Sound is faint
My audio cables broke accidentally
My TV doesn’t have a headphone socket
• Make sure that the cable is connected correctly.
• Make sure that the power supply at the power source is working correctly.
• With the chair turned ON, wiggle the cable in the port. If lights flicker, contact support.
TROUBLESHOOTING TIPS
• Connect a phone using the TV connection guide to test the chair for sound
• Confirm that the device/system is correctly configured
• Make sure that you indeed have a headphone socket on your TV.
• Make sure the volume of the source device is at a higher level to strengthen the signal.
• Please contact X Rocker Support
• You may need to purchase a TOSlink Adapter. If you’re unsure which one, contact support.
• Don’t let X Rocker come in contact with liquids
• Consult Support before unscrewing any electrical components
• Be mindful of cables laying between X Rocker and Power Source
• Be mindful of cables when moving/swivelling in the X Rocker
• Note that broken cables may present a choking risk. Replace
broken cables through Support.
• Do not stand on X Rocker or exceed 250lbs
• Do not lean back on the chair to the point that the pedestal lifts
• Do not use arms as support for getting in and out of chair.
• Playing audio for long periods at loud volumes may contribute to
difficulties in hearing.
HEALTH & SAFETY
ON/OFF
GAMING CHAIR
9V ═ 1A
VOLUME
BASS
INPUT OUTPUT
ON/OFF
GAMING CHAIR
9V ═ 1A
VOLUME
BASS
INPUT OUTPUT
ON/OFF
GAMING CHAIR
9V ═ 1A
VOLUME
BASS
INPUT OUTPUT
VIEW LATEST INSTRUCTIONS ONLINE:
XROCKERUK.COM
XROCKERGAMING.COM
1. Connect B1 Cable to X Rocker control panel INPUT socket.
2. Connect other end of B1 3.5mm end into the headphone socket of your Audio Output device.
3. Once connected to your device,increase volume to 50% of the maximum for the best sound level.
**
1
Plug your power supply into this socket3.Power Input
Press this to power on or power off your gaming chair1.Power on/off
Turn this dial to adjust the master volume5.Volume
Turn this dial to increase or decrease the intensity of bass audio4.Bass
Use this to switch between wired or Bluetooth audio6.Mode Button
Plug the 3.5mm audio cable into here for audio from your TV or controller8.Input
Allows you to connect multiple gaming chairs together9.Output
Plug your headphones or gaming headset in here to play quietly. Perfect for night-time play10.Headphone socket
2.1 WIRELESS with vibration
- ENGLISH
1
2
3
4
5
6
7
8
9
10
6. USB Used to charge devices such as mobile phones. (5V/1A Output)
Turn this dial to increase or decrease the intensity of vibrations2.Vibration
WIRELESS CONNECTION
3M 3.5MM AUDIO CABLE
15CM 3.5MM AUDIO CABLE
B3
B4
1. To connect using the wireless transmitter, connect the wireless transmitter (B4) to
your
TV set using the 3.5mm to 3.5mm cable (B2).
2. Once connected,press the mode button on the control panel on the chair and the
wireless transmitter to the same band(1,2 or 3).
3. To get the best sound, make sure that the volume on the TV is set to approximately
50% of the maximum. Depending on the TV, you may need to set the volume level
separately in the TV sound settings menu. Please refer to the TV manual for guidelines.
*If your TV does not feature a headphone socket then you may need to purchase an additional
TOSlink adapter to get connected directly to a console for audio.
**Depending on your TV, you may need to increase the headphone volume separately in the TV
sound settings.
"2
To Next Page
Need help?
General
