EasyManua.ls Logo

XtendLan DT607 Series - Appendix; Precautions; Specification

XtendLan DT607 Series
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-21-
Precautions
Specication
Please clean the unit with soft cotton cloth, don't use the organic impregnant or chemical
clean agent. If necessary, please use a little pure water or dilute soap water to clean the dust.
The unit is weather resistant. However do not spray high pressure water on access control
keypad directly. Excessive moisture may cause problems with the unit.
You must use the right adaptor which is supplied by the manufacture or approved by the
manufacture.
Pay attention to the high voltage inside the products, please refer service only to a trained
and qualied professional.
APPENDIX
Power supply: DC 24V
Power consumption: Standby 0.8W; Working 3W
Camera lens: Color CMOS, 2.0 Mega pixel
1/2.7’’ sheye camera,170
0
wide angle
Lock Power supply: 12Vdc, 280mA(Internal Power);
Number of relay circuits: 2(the second lock need external device to support)
Mounting: Surface wall-mount / ush mount
Working temperature: -20ºC ~ +55ºC
Protection: IP54
Material: Zinc alloy panel(surface mounted)
Stainless steel panel(ush mounted)
Wiring: 2 wires, non-polarity
Dimension: 176(H)×90(W)×27(D)mm(surface mounted)
220(H)×119(W)×52(D)mm(ush mounted)