Xterra ERG600W - Page 12

10
ERG600W Rower
Seat and Rail
4
1. Slide the Seat (No.36) onto the Slide Rail (No.3).
2. Attach the Slide Rail (No. 3) to the Main Frame (No. 1) using 4 Flat Screws (No.
58).
3. Secure the Stopper (No.35) with 2 Screws (No.60) and Washers (No.87).
Insert all 6 screws partially into the holes rst, and then tighten with Allen Wrench
(No.74).
4. Attach Rail endcap L(No.82) and Rail endcap R(No.83) to the Slide Rail (No.3).