14
ERG600W Rower
Adjustment Guide and Storage
The pedal strap is adjustable and can be
personalized to t the user’s foot size.
To adjust the pedal strap, remove the Velcro
end of the strap from the mesh side by
pulling it upward and over to the side.
Once removed, you may increase the
opening of the pedal strap by pulling the
mesh end up and to the side.
To tighten, pull the Velcro end of the pedal
strap upward then over and down to secure it
to the mesh side of the strap.
To move the machine, lift up the rear stabilizer until the transportation wheels
on the front stand touch the ground. With the wheels on the ground, you can
transport the rower to the desired location with ease.
To Next Page
Loading...
Need help?
General
