Xterra FB350 - Back Cushion & Rear Handlebar Assembly

FB350 Folding Bike
9
2 Nylon Nuts (#17)
2 Carriage Bolts (#78)
2 Flat Washers (#55)
4 Spring Washers
(#84)
4 Allen Screws (#80)
2 Curved Washers
(#13)
2 Allen Screws (#81)
Back Cushion & Rear Handlebar
4
Hardware Step 4
1. Attach the back cushion support tube (75) to the seat post
(03), tighten using 2 nylon nuts (17), 2 at washers (55) and
2 carriage bolts (78).
2. Attach the back cushion (77) onto the back cushion support
tube (75), tighten using 4 spring washers (84) and 4 allen
screws (80).
3. Attach the rear handlebar (76) to the back cushion adjust-
ment set (74), tighten using 2 curved washers (13) and 2
allen screws (81).