Xterra TR200 User Manual

15
CAUTION: Do not attempt to move the unit unless it is in the folded and locked position. Remove the
power cord from the front of the unit to avoid possible damage. Use both handrails to maneuver the
unit to the desired position.
FOLDING INSTRUCTIONS
• TO FOLD THE TREADMILL
Pull the Lock Pin outward and lift the treadmill running deck until it is secured by the locking
mechanism on the left upright tube. You will hear it pop into place when secure.
• TO UNFOLD THE TREADMILL
Apply slight forward pressure on the treadmill running deck with your right hand. Pull out on the
Lock Pin outwards and slowly lower the running deck to the oor.
TRANSPORTATION INSTRUCTIONS
The treadmill is equipped with two transport wheels that are engaged when the treadmill is folded.
After folding simply roll the treadmill away.
OPERATION OF YOUR TREADMILL
TR200 CONSOLE
GETTING STARTED
Power the treadmill on by plugging it into an appropriate wall
outlet, then turn on the power switch located at the front of the
treadmill below the motor hood. Ensure that the safety key is
installed, as the treadmill will not operate without it.
The treadmill will then enter idle mode, which is the starting point
for operation.

Xterra TR200 Specifications

General

Brand	Xterra
Model	TR200
Category	Treadmill
Language	English