Name: Xtool D1 Pro
Brand: Xtool
Rating: 4 (1 reviews)

To Previous Page

xTool D1 Pro

Included with the D1 Pro are a set of eight threaded risers, each

45mm, that can be used to adjust the distance between the laser head

and the workpiece. e risers work to accommodate thick workpieces

as well as objects (drinking glasses, mugs, etc.) held on the rotary

device.

xTool Enclosure

xTool makes the most reasonably-priced engraver enclosure on

the market, complete with exhaust fan and light-shielding viewing

window (FIG. 14). e unit, which is foldable for easy storage, is

composed of light-weight re-retardant materials which provide pro-

tection from smoke, air-borne contaminants, and noise. e unit

components t together with hook-and-loop connectors, making as-

sembly and break-down quick and easy.

FIG. 13. e xTool RA2 Pro Rotary Attachment provides unsurpassed

precision in holding and turning objects in precise synchronization with

the movement of the D1 Pro laser module. Courtesy: xTool

FIG. 14. e xTool enclosure completely surrounds the footprint of the

D1 Pro, conﬁning the intensity of the laser light, as well as smoke, and

airborne contaminants. Courtesy: xTool

Maintenance

Relatively little maintenance is required, and consists of regularly

applying the supplied grease to the slide bars every two weeks to two

months, depending on usage. e user should ensure that the optical

shaft is clean of dirt before applying a thin, uniform layer of grease.

xTool uses high-quality components, and the steel rollers, bearings,

and shafts are rated as lasting three times longer than competitors.

Regular cleaning of the laser lens and surrounding light shield should

be performed when a visual inspection warrants it. xTool provides

clear instructions at https://tinyurl.com/yu8jv3ud.

Other manuals for Xtool D1 Pro

Questions and Answers:

Need help?

Do you have a question about the Xtool D1 Pro and is the answer not in the manual?

General